Weather for model calibration
Every year your meter covers, for your site, hourly, built the same way each year. One job for the whole range, one credit per year.
What you get
Calibrating a building energy model means running it with the weather that actually happened and comparing the result with metered gas and electricity. EPW.tools makes that weather for the coordinates of the building, not for the nearest airport with a published file: one EnergyPlus EPW per year, 8,760 hours (8,784 in a leap year if you keep 29 February).
- The same steps for every year: the hourly reports of a suitable nearby station, gaps filled from reanalysis, satellite sun where it is available, and the same checks on every file (methodology, validation).
- Each file names its sources in its header, and when a station stops reporting or the source changes inside the range, the result says which years differ, so you see it before you compare years.
- Files that EnergyPlus, OpenStudio, DesignBuilder, IES VE and Ladybug read as they are.
- Meter readings on local clock time? The Station data (CSV) tab gives the station's hourly weather in local time, daylight saving included, cut to your meter period.
The years on offer
You can ask for any year since 1990, up to the last complete year, at any latitude and longitude. A multi-year job takes up to 10 years in one job; a longer record is two jobs for the same point. One year costs one credit, as a single actual-year file does.
One price for the set
The pack that covers the years you need, at list price. There is no subscription and credits never expire.
| Years | Credits | The pack that covers them |
|---|---|---|
| 5 years | 5 | Intro pack, 10 credits for $19 (first purchase); after it, 10 credits for $49 |
| 10 years | 10 | Intro pack, 10 credits for $19 (first purchase); after it, 10 credits for $49 |
| Two sites, 10 years each | 20 | Project pack, 20 credits for $79 |
A new account gets 2 free credits, enough to check two years before you buy. Academic accounts get 30% off every pack, and lower prices apply automatically in many countries. Companies can pay by card with a VAT number or by invoice.
A worked example
An office building has monthly utility bills from January 2016 to December 2025, and the energy model has to match them. In the multi-year form, pick the building on the map, set the start year to 2016 and the end year to 2025, and generate. The job makes ten files, Office_2016.epw to Office_2025.epw, for 10 credits: the Intro pack on a first purchase. Run the model once per year with that year's file and set the simulated months beside the bills of the same months. A year that stands out can be checked against the sources named in its file header.
Frequently asked questions
Why one weather file per year for calibration?
A calibrated model is compared with metered energy month by month or hour by hour. The simulation has to see the weather of the months the meter recorded, so each metered year needs its own actual-year file, not a typical year.
Is every year built the same way?
Yes. Each year in the range runs the same steps as a single actual-year file: the hourly reports of a suitable nearby station, gaps filled from reanalysis, satellite sun where it is available, and the same checks. When a station stops reporting or the source changes inside the range, the result says which years differ.
What does a ten-year set cost?
Ten credits, one per year. On a first purchase the Intro pack gives 10 credits for $19; after it, the cheapest pack that covers ten years is 10 credits for $49. Academic accounts get 30% off, and lower prices apply automatically in many countries.
Make the set for your site
Pick the point, the first and the last year. The form shows the pack that covers the years you chose.
Open the multi-year form →